Where does Cedar LNG Pipeline run?

Cedar LNG Pipeline runs from Kitimat to Kitimat, crossing Canada.

How long is Cedar LNG Pipeline?

Cedar LNG Pipeline is 8 km long.

How much gas can Cedar LNG Pipeline carry?

Cedar LNG Pipeline has a design capacity of 4.09 bcm/y. Where every segment of a project repeats the same figure it is counted once rather than summed.

Is Cedar LNG Pipeline operating?

Cedar LNG Pipeline is under construction, with a reported start year of 2028.

Who owns Cedar LNG Pipeline?

Cedar LNG Pipeline is owned by Cedar LNG Partners LP, as recorded in the current tracker release.

Does Cedar LNG Pipeline serve an LNG terminal?

Cedar LNG Pipeline passes within 25 km of 5 tracked LNG terminals. Proximity is not proof of a physical connection; each match is listed with its distance and how it was made.

Cedar LNG Pipeline, Canada

Route

Cedar LNG Pipeline runs from Kitimat to Kitimat. The map draws the tracked route and any LNG terminal within 25 km of it.

Loads about 250 kB of map code and the country outline file.

From: Kitimat
To: Kitimat
Start country: Canada
End country: Canada
Countries crossed: Canada
Onshore / offshore: Not reported
Fuel: Gas
Region: Americas
Route drawn on map: 9.6 km
GEM pipeline ID: P3619
Start year: 2028
GEM wiki page: gem.wiki

Segments

Each row is one row of GEM's pipeline file. Project-level figures repeated on every segment are counted once in the totals above.

Segment	Status	From → to	Length	Capacity	Diameter	Start	Route from
Whole pipeline	Under construction	Kitimat → Kitimat	8	4.09	508 mm	2028	GEM's route file

Connected LNG terminals

Terminals whose coordinates fall within 25 km of this route, or whose name matches the pipeline. Proximity is not proof of a physical connection.

Terminal	Country	Import / export	Status	Distance	Matched by
LNG Canada Terminal	Canada	Export	Operating	0.2 km	route proximity
Cedar FLNG Terminal	Canada	Export	Under construction	0.3 km	route proximity
Douglas Channel LNG Terminal	Canada	Export	Cancelled	0.3 km	route proximity
Triton LNG Export Terminal	Canada	Export	Cancelled	0.3 km	route proximity
Kitimat LNG Terminal	Canada	Export	Cancelled	6.7 km	route proximity

Owners and operators

Stakes as reported by GEM per segment, merged across segments.

Owners

Cedar LNG Partners LP100%

Parent companies

Pembina Pipeline50%

Common questions

Generated from the same tracker fields as the tables above, so the two cannot disagree. Each answer stands on its own.

Where does Cedar LNG Pipeline run?: Cedar LNG Pipeline runs from Kitimat to Kitimat, crossing Canada.
How long is Cedar LNG Pipeline?: Cedar LNG Pipeline is 8 km long.
How much gas can Cedar LNG Pipeline carry?: Cedar LNG Pipeline has a design capacity of 4.09 bcm/y. Where every segment of a project repeats the same figure it is counted once rather than summed.
Is Cedar LNG Pipeline operating?: Cedar LNG Pipeline is under construction, with a reported start year of 2028.
Who owns Cedar LNG Pipeline?: Cedar LNG Pipeline is owned by Cedar LNG Partners LP, as recorded in the current tracker release.
Does Cedar LNG Pipeline serve an LNG terminal?: Cedar LNG Pipeline passes within 25 km of 5 tracked LNG terminals. Proximity is not proof of a physical connection; each match is listed with its distance and how it was made.

Background on the technology and the terms used on this page.

LNG against pipeline gas
A pipeline delivers gas at lower cost than LNG over land up to roughly two to four thousand kilometres, beyond which liquefaction wins, and across any significant body of deep water LNG usually wins at any distance.
How LNG works
Liquefied natural gas is natural gas chilled to about minus 162 degrees Celsius, at which point it becomes a liquid roughly 600 times smaller than the gas, so it can be shipped where no pipeline runs.
Mtpa, bcm and cubic metres
LNG capacity is quoted in three incompatible units, and the two conversions that matter are 1 million tonnes a year equals about 1.36 billion cubic metres of gas a year, and 1 cubic metre of liquid equals about 600 cubic metres of gas.
What terminal status actually means
A project status describes how far an LNG terminal or train has progressed, and the gap between proposed and operating is the single most misread number in the industry.