Hull CMHI-282-08

Specification

As GEM reports it: containment “membrane”, propulsion “ME-GA”.

Membrane (system not specified)Membrane

Identified from the containment system and engine recorded against the ship, and from firms named on it in our curated list.

Designs the high-pressure ME-GI and low-pressure ME-GA two-stroke dual-fuel engines used to propel LNG carriers on boil-off gas.

Stakes exactly as GEM reports them for this vessel.

Vessels from the same yard, delivered the same year, with the same cargo capacity to the nearest 1,000 m³. A shared design is likely but not certain.

Vessel	IMO	Status	Capacity	Containment	Propulsion
Hull CMHI-282-07	—	Under construction	180,000	Membrane (system not specified)	MAN ME-GA

Background on the technology and the terms used on this page.

LNG carrier anatomy
An LNG carrier is a ship built around insulated cargo tanks that hold liquefied gas at minus 162 degrees, with an engine able to burn the cargo vapour that inevitably boils off during the voyage.
Membrane versus Moss tanks
Cargo containment is the system that holds LNG at minus 162 degrees inside a ship, and it comes in two families: membranes, which are thin barriers supported by the hull, and free-standing tanks, which carry their own load.
Propulsion III: ME-GI, X-DF and two-stroke gas injection
ME-GI and X-DF are the two families of low-speed two-stroke marine engine burning natural gas, differing in whether gas is injected at high pressure late in the cycle or admitted at low pressure and premixed.
Ship classes: conventional, Q-Flex, Q-Max and small-scale
LNG carriers fall into recognised size classes running from small-scale vessels under 30,000 cubic metres, through the 174,000 cubic metre conventional standard, to the 266,000 cubic metre Q-Max ships built for Qatar.