Gas transmission pipeline · Arnold to Negaunee
Marquette Connector Pipeline
Marquette Connector Pipeline is an operating gas transmission pipeline in United States. The tracker lists 1 tracked segment, 68 km long and 1.47 bcm/y of capacity, starting up in 2019. It runs from Arnold to Negaunee. It is owned by SEMCO Energy.
Length
68 km
Capacity
1.47 bcm/y
1.1 Mtpa LNG equivalent
Segments tracked
1
Largest diameter 254 mm (10 in)
Route
Marquette Connector Pipeline runs from Arnold to Negaunee. The map draws the tracked route and any LNG terminal within 25 km of it.
Loads about 250 kB of map code and the country outline file.
- From
- Arnold
- To
- Negaunee
- Start country
- United States
- End country
- United States
- Countries crossed
- United States
- Onshore / offshore
- Not reported
- Fuel
- Gas
- Region
- Americas
- Route drawn on map
- 67 km
- GEM pipeline ID
- P0313
- Start year
- 2019
- GEM wiki page
- gem.wiki
Segments
Each row is one row of GEM's pipeline file. Project-level figures repeated on every segment are counted once in the totals above.
| Segment | Status | From → to | Length | Capacity | Diameter | Start | Route from |
|---|---|---|---|---|---|---|---|
| Whole pipeline | Operating | Arnold → Negaunee | 68 | 1.47 | 254 mm | 2019 | GEM's route file |
Connected LNG terminals
Terminals whose coordinates fall within 25 km of this route, or whose name matches the pipeline. Proximity is not proof of a physical connection.
No tracked LNG terminal lies within 25 km of this pipeline's route.
Owners and operators
Stakes as reported by GEM per segment, merged across segments.
Owners
- SEMCO Energy100%
Parent companies
- AltaGas Ltd100%
Common questions
Generated from the same tracker fields as the tables above, so the two cannot disagree. Each answer stands on its own.
- Where does Marquette Connector Pipeline run?
- Marquette Connector Pipeline runs from Arnold to Negaunee, crossing United States.
- How long is Marquette Connector Pipeline?
- Marquette Connector Pipeline is 68 km long.
- How much gas can Marquette Connector Pipeline carry?
- Marquette Connector Pipeline has a design capacity of 1.47 bcm/y. Where every segment of a project repeats the same figure it is counted once rather than summed.
- Is Marquette Connector Pipeline operating?
- Marquette Connector Pipeline is operating, having started in 2019.
- Who owns Marquette Connector Pipeline?
- Marquette Connector Pipeline is owned by SEMCO Energy, as recorded in the current tracker release.