How long is CT Sergipe Gas Pipeline?

CT Sergipe Gas Pipeline is 25 km long.

How much gas can CT Sergipe Gas Pipeline carry?

CT Sergipe Gas Pipeline has a design capacity of 5.11 bcm/y. Where every segment of a project repeats the same figure it is counted once rather than summed.

Is CT Sergipe Gas Pipeline operating?

CT Sergipe Gas Pipeline is operating, having started in 2024.

Who owns CT Sergipe Gas Pipeline?

CT Sergipe Gas Pipeline is owned by CDPQ, ENGIE SA and Engie Brasil Energia, as recorded in the current tracker release.

Does CT Sergipe Gas Pipeline serve an LNG terminal?

CT Sergipe Gas Pipeline passes within 25 km of 1 tracked LNG terminal. Proximity is not proof of a physical connection; each match is listed with its distance and how it was made.

CT Sergipe Gas Pipeline, Brazil

Route

CT Sergipe Gas Pipeline runs from Eneva Hub Sergipe to Carmópolis. The map draws the tracked route and any LNG terminal within 25 km of it.

Loads about 250 kB of map code and the country outline file.

From: Eneva Hub Sergipe
To: Carmópolis
Start country: Brazil
End country: Brazil
Countries crossed: Brazil
Onshore / offshore: Not reported
Fuel: Gas
Region: Americas
Route drawn on map: 26 km
GEM pipeline ID: P7791
Start year: 2024
GEM wiki page: gem.wiki

Segments

Each row is one row of GEM's pipeline file. Project-level figures repeated on every segment are counted once in the totals above.

Segment	Status	From → to	Length	Capacity	Diameter	Start	Route from
Porto Sergipe-Catu Pilar Gas Pipeline	Operating	Eneva Hub Sergipe → Carmópolis	25	5.11	610 mm	2024	GEM's route file

Connected LNG terminals

Terminals whose coordinates fall within 25 km of this route, or whose name matches the pipeline. Proximity is not proof of a physical connection.

Terminal	Country	Import / export	Status	Distance	Matched by
Sergipe FSRU	Brazil	Import	Operating	7.2 km	route proximity

Owners and operators

Stakes as reported by GEM per segment, merged across segments.

Owners

Common questions

Generated from the same tracker fields as the tables above, so the two cannot disagree. Each answer stands on its own.

Where does CT Sergipe Gas Pipeline run?: CT Sergipe Gas Pipeline runs from Eneva Hub Sergipe to Carmópolis, crossing Brazil.
How long is CT Sergipe Gas Pipeline?: CT Sergipe Gas Pipeline is 25 km long.
How much gas can CT Sergipe Gas Pipeline carry?: CT Sergipe Gas Pipeline has a design capacity of 5.11 bcm/y. Where every segment of a project repeats the same figure it is counted once rather than summed.
Is CT Sergipe Gas Pipeline operating?: CT Sergipe Gas Pipeline is operating, having started in 2024.
Who owns CT Sergipe Gas Pipeline?: CT Sergipe Gas Pipeline is owned by CDPQ, ENGIE SA and Engie Brasil Energia, as recorded in the current tracker release.
Does CT Sergipe Gas Pipeline serve an LNG terminal?: CT Sergipe Gas Pipeline passes within 25 km of 1 tracked LNG terminal. Proximity is not proof of a physical connection; each match is listed with its distance and how it was made.

Background on the technology and the terms used on this page.

LNG against pipeline gas
A pipeline delivers gas at lower cost than LNG over land up to roughly two to four thousand kilometres, beyond which liquefaction wins, and across any significant body of deep water LNG usually wins at any distance.
How LNG works
Liquefied natural gas is natural gas chilled to about minus 162 degrees Celsius, at which point it becomes a liquid roughly 600 times smaller than the gas, so it can be shipped where no pipeline runs.
Mtpa, bcm and cubic metres
LNG capacity is quoted in three incompatible units, and the two conversions that matter are 1 million tonnes a year equals about 1.36 billion cubic metres of gas a year, and 1 cubic metre of liquid equals about 600 cubic metres of gas.
What terminal status actually means
A project status describes how far an LNG terminal or train has progressed, and the gap between proposed and operating is the single most misread number in the industry.