Where does Camisea Gas Pipeline run?

Camisea Gas Pipeline runs from Camisea Gas Fields to Lurín, crossing Peru.

How long is Camisea Gas Pipeline?

Camisea Gas Pipeline is 730 km long.

How much gas can Camisea Gas Pipeline carry?

Camisea Gas Pipeline has a design capacity of 15.7 bcm/y. Where every segment of a project repeats the same figure it is counted once rather than summed.

Is Camisea Gas Pipeline operating?

Camisea Gas Pipeline is operating, having started in 2004.

Who owns Camisea Gas Pipeline?

Camisea Gas Pipeline is owned by CPPIB (Canada Pension Plan Investment Board), Enagás SA and Sonatrach SpA, as recorded in the current tracker release.

Does Camisea Gas Pipeline serve an LNG terminal?

Camisea Gas Pipeline passes within 25 km of 1 tracked LNG terminal. Proximity is not proof of a physical connection; each match is listed with its distance and how it was made.

Camisea Gas Pipeline, Peru

Route

Camisea Gas Pipeline runs from Camisea Gas Fields to Lurín. The map draws the tracked route and any LNG terminal within 25 km of it.

Loads about 250 kB of map code and the country outline file.

From: Camisea Gas Fields
To: Lurín
Start country: Peru
End country: Peru
Countries crossed: Peru
Onshore / offshore: Not reported
Fuel: Gas
Region: Americas
Route drawn on map: 714 km
GEM pipeline ID: P1290
Start year: 2004
GEM wiki page: gem.wiki

Segments

Each row is one row of GEM's pipeline file. Project-level figures repeated on every segment are counted once in the totals above.

Segment	Status	From → to	Length	Capacity	Diameter	Start	Route from
Whole pipeline	Operating	Camisea Gas Fields → Lurín	730	15.7	457 mm	2004	GEM's route file

Connected LNG terminals

Terminals whose coordinates fall within 25 km of this route, or whose name matches the pipeline. Proximity is not proof of a physical connection.

Terminal	Country	Import / export	Status	Distance	Matched by
Peru LNG Terminal	Peru	Export	Operating	1.9 km	route proximity

Owners and operators

Stakes as reported by GEM per segment, merged across segments.

Owners

CPPIB (Canada Pension Plan Investment Board)49.87%
Enagás SA28.95%
Sonatrach SpA21.18%

Parent companies

Canada Pension Plan Investment Board49.87%
Enagás SA28.95%
Sonatrach SpA21.18%

Common questions

Generated from the same tracker fields as the tables above, so the two cannot disagree. Each answer stands on its own.

Where does Camisea Gas Pipeline run?: Camisea Gas Pipeline runs from Camisea Gas Fields to Lurín, crossing Peru.
How long is Camisea Gas Pipeline?: Camisea Gas Pipeline is 730 km long.
How much gas can Camisea Gas Pipeline carry?: Camisea Gas Pipeline has a design capacity of 15.7 bcm/y. Where every segment of a project repeats the same figure it is counted once rather than summed.
Is Camisea Gas Pipeline operating?: Camisea Gas Pipeline is operating, having started in 2004.
Who owns Camisea Gas Pipeline?: Camisea Gas Pipeline is owned by CPPIB (Canada Pension Plan Investment Board), Enagás SA and Sonatrach SpA, as recorded in the current tracker release.
Does Camisea Gas Pipeline serve an LNG terminal?: Camisea Gas Pipeline passes within 25 km of 1 tracked LNG terminal. Proximity is not proof of a physical connection; each match is listed with its distance and how it was made.

Background on the technology and the terms used on this page.

LNG against pipeline gas
A pipeline delivers gas at lower cost than LNG over land up to roughly two to four thousand kilometres, beyond which liquefaction wins, and across any significant body of deep water LNG usually wins at any distance.
How LNG works
Liquefied natural gas is natural gas chilled to about minus 162 degrees Celsius, at which point it becomes a liquid roughly 600 times smaller than the gas, so it can be shipped where no pipeline runs.
Mtpa, bcm and cubic metres
LNG capacity is quoted in three incompatible units, and the two conversions that matter are 1 million tonnes a year equals about 1.36 billion cubic metres of gas a year, and 1 cubic metre of liquid equals about 600 cubic metres of gas.
What terminal status actually means
A project status describes how far an LNG terminal or train has progressed, and the gap between proposed and operating is the single most misread number in the industry.