Maran Gas Asclepius (IMO 9302499) — LNG carrier, 146k m³

Specification

As GEM reports it: containment “membrane”, propulsion “steam”.

Hanwha OceanSouth Korea · delivered 2005

Membrane (system not specified)Membrane

Stakes exactly as GEM reports them for this vessel.

Vessels from the same yard, delivered the same year, with the same cargo capacity to the nearest 1,000 m³. A shared design is likely but not certain.

Vessel	IMO	Status	Capacity	Containment	Propulsion
LNG Oyo	9267003	Operating	145,800	Membrane (system not specified)	Steam turbine
Umm Bab	9308431	Operating	145,700	Membrane (system not specified)	Steam turbine

Background on the technology and the terms used on this page.

LNG carrier anatomy
An LNG carrier is a ship built around insulated cargo tanks that hold liquefied gas at minus 162 degrees, with an engine able to burn the cargo vapour that inevitably boils off during the voyage.
Membrane versus Moss tanks
Cargo containment is the system that holds LNG at minus 162 degrees inside a ship, and it comes in two families: membranes, which are thin barriers supported by the hull, and free-standing tanks, which carry their own load.
Propulsion I: steam turbines and why they endured
Steam turbine propulsion drives an LNG carrier by raising steam in boilers that can burn cargo boil-off gas, fuel oil, or any mixture of the two, and turning a turbine geared to a single propeller shaft.
Ship classes: conventional, Q-Flex, Q-Max and small-scale
LNG carriers fall into recognised size classes running from small-scale vessels under 30,000 cubic metres, through the 174,000 cubic metre conventional standard, to the 266,000 cubic metre Q-Max ships built for Qatar.